ITJ HM617049/HM617010
Информация о продукте
Модель подшипника
HM617049/HM617010
Габаритные размеры
| d | 85.725 | mm | Bore diameter |
| D | 142.138 | mm | Outside diameter |
| T | 42.862 | mm | Total width |
| B | 42.862 | mm | Width of inner ring |
| C | 34.133 | mm | Width of outer ring |
| Cup r (min.) | 3.3 | mm | Chamfer dimension of outer ring (Cup) |
| Cone r (min.) | 4.8 | mm | Chamfer dimension of inner ring (Cone) |
Базовые нагрузки
| Cr | 263000 | N | Basic dynamic load rating |
| C0r | 345000 | N | Basic static load rating |
Предельные скорости
| Grease | 2400 | min-1 | Grease lubrication |
| Oil (Oil-bath) | 3400 | min-1 | Oil-bath lubrication |
Размеры буртиков и галтелей
| da | 106 | mm | Diameter of shaft abutment |
| Da | 125 | mm | Diameter of housing abutment |
| db | 95 | mm | Diameter of shaft abutment |
| Db | 137 | mm | Diameter of housing abutment |
| ra (max.) | 4.8 | mm | Radius of shaft or housing fillet of inner ring |
| ra (max.) | 3.3 | mm | Radius of shaft or housing fillet of outer ring |
Расчетные коэффициенты
Масса
| CONE (approx.) | 1.77 | kg | |
| CUP (approx.) | 0.911 | kg |